Tools and Tips #1 from Applied Science

TL;DR

In this video, the content creator shares useful tips and tricks for the workshop, including cable tie installation, adhesive recommendations, desk lamp suggestions, well nuts, hot glue freezing, tapping holes, gaffers tape, double-sided tape, and drill bits for drilling in brittle materials.

Transcript

hello I really appreciate the patreon contributions that you've made to my channel it means a lot to me and so in today's video I'd like to share with you some of the tips and tricks that I've used in the shop and hopefully they'll be useful for you as well first up you've probably seen these before just standard cable ties but what you may not hav... Read More

Key Insights

• 😂 The content creator recommends using gaffers tape instead of duct tape for its clean tear and stronger pulling power.
• 🥳 Neato double-sided tape is a strong tape made with craft paper that can hold down parts during milling operations.
• 🔺 Using drill bits with a sharp point angle and zero-degree rake angle can prevent brittle materials like acrylic from cracking when drilled.
• 🔩 Well nuts are a useful device for mounting objects with a nut and bolt onto thin plastic or metal sheets, creating a watertight seal.
• 🕳️ Tapping holes in soft materials like plastic may be easier and quicker using a bottoming tap instead of a taper tap.
• 🫠 Distilled water can be used to cool the material while tapping holes, especially in materials prone to melting, like acrylic.
• 🤍 The content creator recommends a desk lamp with a warm white LED and an inline switch, as it is highly useful and can be positioned easily.

Questions & Answers

Q: Where can I purchase the cable tie installation gun mentioned in the video?

The cable tie installation gun can be purchased at McMaster, Fry's Electronics, and some other local electronics stores. The content creator provides links in the video description.

Q: Is Devcon plastic welder suitable for all types of materials?

While Devcon plastic welder is excellent for bonding most plastics, it can also be used on metal, wood, smooth surfaces, and rough surfaces.

Q: What adhesive is recommended for bonding polyethylene?

Scotch-weld DP 8005 is specially made for bonding polyethylene. It comes in a ten-to-one mixed ratio and creates a gas-tight seal on plastics like polyethylene.

Q: How can I quickly freeze hot glue to hold it in place?

You can use a can of air duster turned upside down or actual freeze spray to freeze hot glue quickly, preventing it from dripping while it sets.

Summary & Key Takeaways

• The content creator shares a professional cable tie installation gun that makes using standard cable ties easier by automatically tightening and clipping off the tail.

• They recommend Devcon plastic welder as their favorite adhesive, which works well on plastics and other materials.

• They discuss different adhesives for specific applications, such as bonding materials like polyethylene, repairing vintage plastic parts, and making gas tight seals.