Card Expert Teaches Friends THE HARDEST CARD SHUFFLE (TUTORIAL)

TL;DR

To perform the Revolution Cut, begin in mechanic’s grip, lower roughly half the deck with your index finger, and rotate the separated packet away from you. The tutorial shows how the thumb, index, ring, and middle fingers reposition to pivot, clear, and return the packet to the Sharlie A position. Read on for the exact grip changes and rotation sequence.

Transcript

out of there oh let go shakey whoa all you cleared it I love that though you probably won't be learning this move it's too difficult so good luck done slowly it looks kind of bad but done in real speed looks ridiculously fast I already welcomed welcome guys these are my peeps the story this is Angelo and today they're going to learn probably one of... Read More

Key Insights

• ❓ The Revolution Cut is a challenging move in cardistry.
• 👻 Gripping the deck with three fingers allows for greater control and manipulation.
• 💨 The Revolution Cut involves twisting the deck away from the performer and rotating it to create a visually appealing effect.
• ❓ The tutorial includes step-by-step instructions and a demonstration of the Revolution Cut.

Questions & Answers

Q: How do you perform the Revolution Cut?

Start in mechanic’s grip and let roughly half the deck drop with your index finger. Rotate that packet away from you, catch its edge with your ring finger, turn it all the way around, and push up with the index finger to finish.

Q: What grip should you use to begin the Revolution Cut?

Begin by holding the deck in mechanic’s grip. From there, move into the Sharlie A position before starting the packet rotation.

Q: How does the Sharlie A cut help with the Revolution Cut?

The tutorial presents the Sharlie A cut as the starting foundation for the Revolution Cut. If you can already do it, you are prepared for the initial grip and packet separation used in the move.

Q: Which direction should you rotate the packet?

Rotate the packet away from you, not toward you. The thumb pushes outward as the ring finger catches the edge and helps turn the packet around.

Q: How much of the deck should you separate?

Let approximately half of the packet drop using your index finger. The instructor also says to riffle down about half the packet, or whatever amount you can manage.

Q: Where should the middle finger be placed?

Place the middle finger on the short edge of the packet. This position is part of the three-finger hold used while pivoting and rotating the cards.

Q: How do you clear and rotate the packet during the cut?

Place your thumb at the corner near where the ring finger was, then use the thumb to pull and rotate the packet outward until it clears. After the thumb-held packet drops, move the thumb back toward the ring finger and continue rotating with the three-finger grip.

Q: What mistake should you avoid when separating the deck?

Do not leave one card behind when dropping the packet with your index finger. The tutorial notes that this makes the Revolution Cut harder to perform.

Summary & Key Takeaways

• The content starts with the host introducing a difficult cardistry move but acknowledges that most viewers will not be able to learn it.

• The tutorial begins with the mechanics grip and progresses to the Sharlie A cut.

• Viewers are taught how to grip the deck with three fingers and twist it away from them.

• The tutorial continues with instructions on how to perform the Revolution Cut, ending with a demonstration.