Finally Replacing That NOISY Bearing! | Variable Speed Milling Machine

TL;DR

The video shows the process of disassembling and fixing a noisy bearing in a milling machine.

Transcript

how you going guys Kurtis from Cutting Edge engineering so today's job we are finally getting around to pulling apart our milling machine to replace that noisy bearing so I know there's a lot of you that have commented wondering what is wrong with the milling machine because it sounds terrible the noise is something I've never actually noticed befo... Read More

Key Insights

• 🎰 The milling machine featured in the video is a high-quality Taiwanese-built machine.
• 🤕 The machine has a versatile head that can tilt, rotate, and move in various directions.
• 🎮 The video demonstrates the step-by-step process of disassembling and fixing a noisy bearing in the milling machine.

Questions & Answers

Q: What type of milling machine is being shown in the video?

The milling machine is a BM63VE, a Taiwanese-built machine imported by Hare and Forbes in Australia.

Q: Why is the milling machine making noise?

The noise is caused by a damaged bearing in the machine.

Q: What are the specifications of the milling machine?

The machine has a table size of 1370mm long by 250mm wide and travels of 900mm (X-axis), 400mm (Y-axis), and 400mm (Z-axis). It weighs 1.5 tonnes.

Q: How was the bearing replaced?

The video shows the step-by-step process of disassembling the machine, removing the old bearing, replacing it with a new one, cleaning the components, and reassembling the machine.

Q: What other components were inspected during the process?

The video shows that other components, such as belts and gears, were inspected and replaced if necessary during the disassembly and reassembly process.

Key Insights:

• The milling machine featured in the video is a high-quality Taiwanese-built machine.
• The machine has a versatile head that can tilt, rotate, and move in various directions.
• The video demonstrates the step-by-step process of disassembling and fixing a noisy bearing in the milling machine.
• Proper maintenance and regular inspection of milling machine components are important to ensure trouble-free operation.

Summary & Key Takeaways

• The milling machine is a BM63VE, a Taiwanese-built machine imported by Hare and Forbes in Australia.

• The machine has a table size of 1370mm long by 250mm wide and travels of 900mm (X-axis), 400mm (Y-axis), and 400mm (Z-axis). It weighs 1.5 tonnes and has a versatile head that can tilt and rotate.

• The video shows the step-by-step process of disassembling the machine, replacing the bearing, cleaning the components, and reassembling the machine.